Product: TCXO and VCTCXO - "W" Series
Output: PECL Square Wave

Download Selection Guide [ (683 KB) ]
View Package Photos [ (175 KB) ]
Product Summary:

Output Wave Form: Square Wave
TCXO VCTCXO Available
Frequency Range 		RoHS Compliant
Equivalent Model 		Package Description
Thru-Hole Types
MW38P_ VMW38P_ 12.0 ~ 800.0 MHz MW38P_ VMW38P_ 4 pin DIP
MW39P_ VMW39P_ MW39P_ VMW39P_ 4 pin DIP
MW14P_ VMW14P_ MW14P_ VMW14P_ 4 pin DIP. Hermetically sealed.
MW15P_ VMW15P_ MW15P_ VMW15P_ 4 pin DIP. With trimmer.
MW8P_ VMW8P_ MW8P_ VMW8P_ 4 pin DIP. Half size. Hermetically sealed.
MW9P_ VMW9P_ MW9P_ VMW9P_ 4 pin DIP. Half size. With trimmer
Gull Wing Surface Mount Types
MW55P_ VMW55P_ 12.0 ~ 800.0 MHz MW55P_ VMW55P_ 4 pin gull wing
MW47P_ VMW47P_ MW47P_ VMW47P_ 4 pin gull wing
MW24P_ VMW24P_ MW24P_ VMW24P_ 4 pin gull wing. Hermetically sealed.
MW25P_ VMW25P_ MW25P_ VMW25P_ 4 pin gull wing. With trimmer
MW28P_ VMW28P_ MW28P_ VMW28P_ 4 pin gull wing. Half size. Hermetically sealed.
MW29P_ VMW29P_ MW29P_ VMW29P_ 4 pin Gull wing. Half size. With trimmer
Leadless Surface Mount Types
MW62P_ VMW62P_ 12.0 ~ 800.0 MHz MW62P_ VMW62P_ 6 pad FR4 base. 2.5 mm H
MW42P_ VMW42P_ MW42P_ VMW42P_ 4 pad FR4 base. 2.5mm H
MW64P_ VMW64P_ MW64P_ VMW64P_ 6 pad FR4 base. 4.7 mm H
MW44P_ VMW44P_ MW44P_ VMW44P_ 4 pad FR4 base. 4.7 mm H
(V)M576P (V)M576P Same(1) Same(1) 4 pad ceramic base. 5 x 7 mm
MW53P_ VMW53P_ Under Development Same(1) Same(1) 4 pad ceramic base. 5 x 3.2 mm


"_" is voltage code. For RoHS equivalent model please add "G" after the package code. M14TG3, for example, would be a Voltage Code "3" RoHS-compliant S series M14 package.

(1) MW57P, VMW57P, MW53P, and VMW53P are RoHS compliant and lead-free products.

Note: Frequency tuning by built-in mechanical trimmer (variable capacitor) is standard for all models except models M57T, VM57T, M53T, and VM53T. Please specify when ordering if trimmer is not required.

Note: Non-hermetically sealed (VC)TCXO products are not subjected to the washing cycles as the solvent degrade the trimmer capacitor. If cleaning is mandatory please choose hermetically sealed packages or no-trimmer option.



General Specifications: (at +25°C and specified input voltage)

Frequency Range 12.0 ~ 800.0 MHz
Output Wave Form Differential PECL Square Wave. Wave Form Code is "P".
Initial Calibration Tolerance ±2 ppm at +25° ±2°C, Vcon = +1.65V
Frequency Stability
• vs Temperature
• vs Aging
• vs Voltage Change
• vs Load Change
• vs reflow (SMD models only)
• ±2.5 ppm over -30°Cto 80°C (custom spec. are available)
• ±1.0 ppm max. first year at +25°C
• ±0.3 ppm max. for a ±5% input voltage change
• ±0.3 ppm max. for a ±10% loading condition change
• ±1 ppm max. 1 reflow and measured 24 hours afterwards
Current Consumption 12 MHz ~ 24 MHz: 33 mA max;
24 MHz ~ 96 MHz: 50 mA max;
96 MHz ~ 700 MHz: 85 mA max; (Measured with load).
Supply Voltage (VDD) +3.3V ±5% (voltage code "33")
Supply Voltage Magnitude Change (Δ VDD) -50 mV min.; +50 mV max.
Output Voltage Level Logic High "1" VOH: 1.4 V typ.; 1.6 V max.; Condition: 100 Ω differential load
Logic Low "0" VOL: 0.9 V min.; 1.1 V typ.; Condition: 100 Ω differential load
Offset Voltage (VOS) 1.125 V min.; 1.20 V typ.; 1.375 V max.
Offset Magnitude Change (ΔVOS) 0.0 mV min.; 3 mV typ.; 25 mV max.
Output Differential Voltage (VOD) 247 mV min.; 355 mV typ.; 454 mV max.
Rise Time and Fall Time (Tr; Tf ) 1 ns max. 20% ↔ 80% of waveform; 100 Ω differential load
Duty Cycle 45% ~ 55% measured at 50% waveform
Start-Up Time. 5 m. sec. max
Pad 1:
Electronic Frequency
Tuning
(VCTCXO only)		 Control Voltage +1.5 V ±1.0V
Frequency Deviation Range ±10 ppm typical.
Slope Polarity Positive: Positive voltage for positive frequency shift
Linearity 10 % max.
Pad 2: Tristate Function No Connection Differential PECL and complementary PECL outputs.
Disable Both outputs are disabled (high impedance) when pad No. 2
is taken below 0.45*Vcc referenced to ground (threshold).
Oscillator is always ON. Only buffer stage is disabled.
Disable current: 50 uA max. (at 0.0 V).
Disable time: 10 ns max.
Enable At disabled mode, both outputs are enabled when pad No. 2
is taken above 0.45*Vcc referenced to ground (threshold).
Enable time: 10ns+one period of the output frequency max.
Output Load 100 Ω differential load.
Aging ±1ppm per year max.
Packaging -55°C to +125°C -55°C to +125°C
Storage Temperature -40°C to +85°C or -55°C to +125°C (package dependent)
Contact Pad Surface Finish Gold Over Nickel on Ceramic Substrate

Note 1: Some specifications are package dependent. Please refer to the spec. sheet of individual packages once a package is selected..
Note 2: TCXO products ordered without mechanical and electrical frequency tuning should have a frequency tolerance of ±2 ppm (at +25°C) and the frequency stability over temperature will be from that measured value.
Back to Top