• HPA Series uses a 3^rd overtone crystal to achieve ultra low jitter and phase noise.
• HPF and HPW use high-Q fundamental crystal and low jitter multiplier circuits.
• HPA and HPF have phase jitter < 1 ps . "HPW" offers moderate jitter and low cost.

Model		" HPF " Series		" HPW " Series		" HPA " Series
Technology		High Q Fundamental Crystal + Low Jitter Multiplier Circuit		High Q Fundamental Crystal + Multiplier Circuit		Third-Overtone Crystal (non-PLL)
Output Logic		LVPECL
Frequency Range		38.0 MHz ~ 640.0 MHz		750 KHz ~ 800.0 MHz		60.0 MHz ~ 320.0 MHz
Supply Voltage (VDD)		+2.5 VDD ± 5%	+3.3 VDD ± 5%	+3.3 VDD ± 5%		+2.5 VDD ± 5%	+3.3 VDD ± 5%
Supply Voltage Code		" 25 "	" 3 "	" 3 "		" 25 "	" 3 "
Output Voltage HIGH "1", VOH		VDD-1.025 min. Termination: RL = 50 Ω to (VDD-2.0V).
Output Voltage LOW "0", VOL		VDD-1.620 max. Termination: RL = 50 Ω to (VDD-2.0V).
Integrated Phase Jitter (12 KHz to 20 MHz)		0.4 ps (typ.) ; 0.5 ps (max.) For 156.250 MHz		2.6 ps (typ.) ; 4.0 ps (max.) For 155.520 MHz		0.25 ps (typ.) ; 4.0 ps (max.) For 155.520 MHz
Period Jitter		3.0 ps (typ.) ; 5.0 ps (max.) For 156.250 MHz		4.3 ps (typ.) For 155.520 MHz		3.0 ps (typ.) For 155.520 MHz
Period Jitter (peak-to-peak)		20 ps (typ.) ; 30 ps (max.) For 156.250 MHz		27 ps (typ.) For 155.520 MHz		21 ps (typ.) For 155.520 MHz
Phase Noise	Offset	Frequency: 156.250 MHz		Frequency: 155.520 MHz		Frequency: 155.520 MHz
	10 Hz	-62 dBc / Hz		-65 dBc / Hz		-65 dBc / Hz
	100 Hz	-92 dBc / Hz		-95 dBc / Hz		-95 dBc / Hz
	1 KHz	-120 dBc / Hz		-120 dBc / Hz		-120 dBc / Hz
	10 KHz	-132 dBc / Hz		-125 dBc / Hz		-128 dBc / Hz
	100 KHz	-128 dBc / Hz		-121 dBc / Hz		-122 dBc / Hz
	1 MHz	-140 dBc / Hz		-120 dBc / Hz		-120 dBc / Hz
	10 MHz	-150 dBc / Hz		-140 dBc / Hz		-140 dBc / Hz
Current Consumption (15 pF)		38 MHz ~ 100 MHz: 65 mA max.		< 24 MHz: 25 mA		75 mA max. for 212.5 MHz
		100.01 MHz ~ 320 MHz : 80 mA max.		24.01 MHz ~ 96 MHz: 65 mA max.
		320.01 MHz ~ 640 MHz : 90 mA max.		96.01 MHz ~ 700 MHz : 100 mA max.
Rise Time (Tr) & Fall Time (Tf)		0.7 ns typ. (20% ↔ 80% of the PECL wave form )		1.5 ns typ. (20% ↔ 80% of the PECL wave form )		0.25 ns typ. (20% ↔ 80% of the PECL wave form. )
Frequency Stability(1) Commercial temp. range (code "C")		"A": ±25 ppm over 0°C to +70°C "B":±50 ppm over 0°C to +70°C "C":±100 ppm over 0°C to +70°C For non-standard please give desired frequency stability after the "C". For example "C20" is ±20 ppm over 0 to +70°C
Frequency Stability(1) Industrial temp. range (code "I")		"D":±25 ppm over -40°C to +85° (not available on all packages) "E":±50 ppm over -40°C to +85°C "F":±100 ppm over -40°C to +85°C For non-standard please give desired frequency stability after the "I". For example "I20" is ±20 ppm over -40 to +85°C
Load		RL = 50 Ω to (VDD - 2.0V) from each output
Start-up Time		10 ms. (max.)
Duty Cycle		50% ± 5% ( measured at VDD - 1.3V)
Tri-state Function		Tri-state Enable High. No connection or 70% of VDD min. is applied to a Tri-state pad to enable both outputs. 30% of VDD max. to disable both outputs (high impedance).
Input Static Discharge Protection		2 KV (min.)
Storage Temperature		-55°C to + 150°C
Aging		± 3ppm max. first year ; ± 2 ppm max. per subsequent year
Absolute Maximum Rating (permanent damage may be created if operated beyond limits specified)
Supply Voltage VDD		+4.6 V D.C. (max.)
Input Voltage Vi		VSS-0.5 (min.) ; VDD+0.5 V (max.)
Input Voltage Vo		VSS-0.5 (min.) ; VDD+0.5 V (max.)

Package Photo	Product Series	No. of pins or pads	Package Size (mm) / Description
	HPF5761	6	5x7x2.5 / Tri-state on pad 1.
	HPW5761	6	5x7x2.5 / Tri-state on pad 1.
	HPA5761	6	5x7x2.5 / Tri-state on pad 1.
	HPF5762	6	5x7x2.5 / Tri-state on pad 2.
	HPW5762	6	5x7x2.5 / Tri-state on pad 2.
	HPA5762	6	5x7x2.5 / Tri-state on pad 2.
	HPF14	4	Full Size 4  pin DIP.
	HPW14	4	Full Size 4  pin DIP.
	HPA14	4	Full Size 4  pin DIP.
	HPF24	4	Full Size 4  pin Gull Wing.
	HPW24	4	Full Size 4  pin Gull Wing.
	HPA24	4	Full Size 4  pin Gull Wing.
	HPF8	4	Half Size 4  pin DIP.
	HPW8	4	Half Size 4  pin DIP.
	HPA8	4	Half Size 4  pin DIP.
	HPF18	4	Half Size 4  pin Gull Wing.
	HPW18	4	Half Size 4  pin Gull Wing.
	HPA18	4	Half Size 4  pin Gull Wing.
	HPF621	6	9.6x11.4x2.5 mm 6 pad SMD. Tri-state on Pad 1
	HPW621	6	9.6x11.4x2.5 mm 6 pad SMD. Tri-state on Pad 1
	HPA621	6	9.6x11.4x2.5 mm 6 pad SMD. Tri-state on Pad 1
	HPF622	6	9.6x11.4x2.5 mm 6 pad SMD. Tri-state on Pad 2
	HPW622	6	9.6x11.4x2.5 mm 6 pad SMD. Tri-state on Pad 2
	HPA622	6	9.6x11.4x2.5 mm 6 pad SMD. Tri-state on Pad 2