Product: XO (Clock Oscillator)
Series: HF, HW, and HV
Output: LVCMOS Logic Output - 125.01 to 800 MHz
Series: HF, HW, and HV
Output: LVCMOS Logic Output - 125.01 to 800 MHz
• "HF" has the best performance with a phase jitter < 1 ps.• "HW" and "HV" use high-Q fundamental crystal and multiplier circuit..
• "HW" has moderate jitter and can achieve 800 MHz
• "HV" also has moderate jitter and can achieve 200MHz but has a lower cost.
| Model | " HF " Series | " HW " Series | " HV" Series | ||||
|---|---|---|---|---|---|---|---|
| Technology |
High Q Fundamental Crystal + Ultra Low Jitter Multiplier Circuit |
High Q Fundamental Crystal + Low Jitter Multiplier Circuit |
High Q Fundamental Crystal + Low Jitter Multiplier Circuit |
||||
| Output Logic | LVCMOS | ||||||
| Frequency Range | 125.01 MHz ~ 200.0 MHz (15 pF load) 125.01 MHz ~ 320.0 MHz (10 pF load) |
125.01 MHz ~ 800.0 MHz | 125.01 MHz ~ 200.0 MHz | ||||
| Supply Voltage (VDD) | +2.5 VDD ± 5% | +3.3 VDD ± 5% | +3.3 VDD ± 5% | +3.3 VDD ± 5% | |||
| Supply Voltage Code | " 25 " | " 3 " | " 3 " | " 3 " | |||
| Output Voltage HIGH "1", VOH | 90% of VDD min. | ||||||
| Output Voltage LOW "0", VOL | 10% of VDD max. | ||||||
| Integrated Phase Jitter (12 KHz to 20 MHz) |
0.4 ps (typ.) ; 0.5 ps (max.) For 156.250 MHz |
2.6 ps (typ.) ; 4.0 ps (max.) For 155.520 MHz |
2.3 ps (typ.) ; 4.0 ps (max.) For 155.520 MHz |
||||
| Period Jitter | 3.0 ps (typ.) ; 5.0 ps (max.) For 156.250 MHz |
4.3 ps (typ.) For 155.520 MHz |
4.0 ps (typ.) For 155.520 MHz |
||||
| Period Jitter (peak-to-peak) | 20 ps (typ.) ; 30 ps (max.) For 156.250 MHz |
27 ps (typ.) For 155.520 MHz |
27 ps (typ.) For 155.520 MHz |
||||
| Phase Noise | Offset | Frequency: 156.250 MHz | Frequency: 155.520 MHz | Frequency: 155.520 MHz | |||
| 10 Hz | -62 dBc / Hz | -65 dBc / Hz | -65 dBc / Hz | ||||
| 100 Hz | -92 dBc / Hz | -95 dBc / Hz | -95 dBc / Hz | ||||
| 1 KHz | -120 dBc / Hz | -120 dBc / Hz | -120 dBc / Hz | ||||
| 10 KHz | -132 dBc / Hz | -125 dBc / Hz | -128 dBc / Hz | ||||
| 100 KHz | -128 dBc / Hz | -121 dBc / Hz | -122 dBc / Hz | ||||
| 1 MHz | -140 dBc / Hz | -120 dBc / Hz | -120 dBc / Hz | ||||
| 10 MHz | -150 dBc / Hz | -140 dBc / Hz | -140 dBc / Hz | ||||
| Current Consumption (15 pF) | 40 mA (max.) | 40 mA (max.) | 25 mA (max.) | ||||
| Rise Time (Tr) & Fall Time (Tf) | 0.7 ns typ. (0.3V↔ 3.0V, 15 pF load ) |
1.2 ns typ. (0.3V↔ 3.0V, 15 pF load ) |
1.2 ns typ. (0.3V↔ 3.0V, 15 pF load ) |
||||
| Frequency Stability(1) Commercial temp. range (code "C") |
"A": ±25 ppm over 0°C to +70°C "B":±50 ppm over 0°C to +70°C "C":±100 ppm over 0°C to +70°C For non-standard please give desired frequency stability after the "C". For example "C20" is ±20 ppm over 0 to +70°C |
||||||
| Frequency Stability(1) Industrial temp. range (code "I") |
"D":±25 ppm over -40°C to +85° (not available on all packages) "E":±50 ppm over -40°C to +85°C "F":±100 ppm over -40°C to +85°C For non-standard please give desired frequency stability after the "I". For example "I20" is ±20 ppm over -40 to +85°C |
||||||
| Load | 15 pF | ||||||
| Start-up Time | 10 ms. (max.) | ||||||
| Duty Cycle | 50% ± 5% ( measured at 50% of VDD) | ||||||
| Tri-state Function |
Tri-state Enable High. No connection or 70% of VDD min. is applied to a Tri-state pad to enable both outputs. 30% of VDD max. to disable both outputs (high impedance). |
||||||
| Input Static Discharge Protection | 2 KV (min.) | ||||||
| Storage Temperature | -55°C to + 150°C | ||||||
| Aging | ± 3ppm max. first year ; ± 2 ppm max. per subsequent year | ||||||
| Absolute Maximum Rating (permanent damage may be created if operated beyond limits specified) | |||||||
| Supply Voltage VDD | +4.6 V D.C. (max.) | ||||||
| Input Voltage Vi | VSS-0.5 (min.) ; VDD+0.5 V (max.) | ||||||
| Input Voltage Vo | VSS-0.5 (min.) ; VDD+0.5 V (max.) | ||||||
| Package Photo | Product Series |
No. of pins or pads | Package Size (mm) / Description |
 |
HF5761 | 6 |
5x7x2.5 / Tri-state on pad 1. |
|---|---|---|---|
| HW5761 | 6 |
5x7x2.5 / Tri-state on pad 1. |
|
| HV5761 | 6 |
5x7x2.5 / Tri-state on pad 1. |
|
| HF5762 | 6 |
5x7x2.5 / Tri-state on pad 2. |
|
| HW5762 | 6 |
5x7x2.5 / Tri-state on pad 2. |
|
| HV5762 | 6 |
5x7x2.5 / Tri-state on pad 2. |
|
 |
HF14 | 4 | Full Size 4 pin DIP. |
| HW14 | 4 | Full Size 4 pin DIP. | |
| HV14 | 4 | Full Size 4 pin DIP. | |
 |
HF24 | 4 | Full Size 4 pin Gull Wing. |
| HW24 | 4 | Full Size 4 pin Gull Wing. | |
| HV24 | 4 | Full Size 4 pin Gull Wing. | |
 |
HF8 | 4 | Half Size 4 pin DIP. |
| HW8 | 4 | Half Size 4 pin DIP. | |
| HV8 | 4 | Half Size 4 pin DIP. | |
 |
HF18 | 4 | Half Size 4 pin Gull Wing. |
| HW18 | 4 | Half Size 4 pin Gull Wing. | |
| HV18 | 4 | Half Size 4 pin Gull Wing. | |
 |
HF621 | 6 | 9.6x11.4x2.5 mm 6 pad SMD. Tri-state on Pad 1 |
| HW621 | 6 | 9.6x11.4x2.5 mm 6 pad SMD. Tri-state on Pad 1 | |
| HV621 | 6 | 9.6x11.4x2.5 mm 6 pad SMD. Tri-state on Pad 1 | |
 |
HF622 | 6 | 9.6x11.4x2.5 mm 6 pad SMD. Tri-state on Pad 2 |
| HW622 | 6 | 9.6x11.4x2.5 mm 6 pad SMD. Tri-state on Pad 2 | |
| HV622 | 6 | 9.6x11.4x2.5 mm 6 pad SMD. Tri-state on Pad 2 |
(1)Inclusive of 25°C tolerance, operating temperature range, ±10% input voltage variation, load change, aging, shock and vibration.